Quick Answer: How Do You Replace A Toilet Seat With No Access Underside?

How do you tighten a toilet seat with no access underside?

Use the screwdriver to tighten the flip screws on the toilet seat caps.

That’s only if the flip screws are used to tighten the seat caps.

But sometimes, the seat caps are tightened using wingnuts.

In this case, you will use a pair of pliers to tighten the wingnuts so the caps are tightly fixed in place..

How do you remove top fix toilet seat fittings?

To remove ,the screw locates Into the nut ,one turn. Then press down on the screw. This pushes the coned nut down and releases the expansion / pressure. Then pull the whole thing upward ,with a wiggle, and out.

How do you measure for a replacement toilet seat?

Measure the length of the bowl from between the seat bolts to the outside edge of the front of the bowl. If you have a round bowl, this dimension should be about 16.5 inches. If you have an elongated bowl, the measurement should be around 18 to 18.5 inches.

Is it easy to change a toilet seat?

Installing a new toilet seat is an easy DIY project. Whether you’re replacing yours because it’s old, or because you just want a new style, all you need are some basic tools and a few minutes. Unbolt the old seat, then pop the new one in place using the hardware included in your new toilet seat’s box.

What is top fixing toilet seat?

A top fixing hinge works by feeding two bolts into the toilet pan. A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath. … We recommend soft close toilet seats for that added touch of luxury that we are sure you will love.

How many types of toilet seats are there?

Toilet seats don’t come in sizes, but they do come in two different shapes: round toilet seats and elongated toilet seats, each of which correspond to two different toilet bowl shapes. Round toilet seats are still the standard in most homes, and they’re the toilet seats you typically see most often.

How do I get my old toilet seat off?

First, take a look at the bolts that secure the seat. If the bolts or nuts are plastic, they can’t corrode and will come off easily. Simply pry open the cover behind the seat to expose the bolt’s head. Unscrew the bolt with a pliers or a screwdriver while you hold the nut underneath with the pliers.

Do all toilet seats attach the same?

Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying. … Most toilet seats are an oval shape, although some may be more of a contemporary square or D-shape.

How do you tighten a toilet seat with a allen key?

Replace the seat and using the small hex key tighten the grub screws to fully secure the seat into position. Fix the allen screw into the toggle collar and push through the hole on the top of the toilet pan. Push the allen screw until the spring loaded bar flips over.

How do you tighten a new toilet seat?

Use a screwdriver to pry these plastic covers open to expose the bolts that secure the seat to the top of the toilet bowl. If the bolts have slotted heads, then tighten them by turning clockwise with a screwdriver until they are tight.

Are toilet seat fittings universal?

Do all toilet seats fit the same? No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying. There are three types of toilet shapes commonly found in UK homes. These are the traditional pointed-nose, D-shape, and round-nose seats.

How often should you change your toilet seat?

A plumber trying to get some money may tell you to replace your toilet about every 8 to 10 years. However, unless the porcelain breaks. There really is no need to replace it.

What is the difference between top fix and bottom fix toilet seats?

A top fixing hinge works by feeding two bolts into the toilet pan. A bottom fixing is a more traditional style fixing, with two bolts that fit down into your pan and are then tightened from underneath.

How are toilet seats attached?

Most toilet seats are attached to the toilet with fittings. These are held together by two bolts usually hidden by plastic caps at the back of the seat. … These nuts are often plastic but may be made from metal – depending on the age of the seat. Use your pliers to loosen the nuts, and then remove them by hand.